 
Garmin GMR™ 406 Open Array Radar
These are NEW units, just in from Garmin with full Garmin warranty. They are the same package and accessories you would pay hundreds more for at your local electronics superstore.
click HERE to see how long it normally takes to get your order
GMR 404/406 marine radar pedestal supports GMR 404's 4 ft and GMR 406's 6 ft open array and must be purchased separately in combination with these products.
All radar data is digitally processed within this solid pedestal via a digital signal processor and is efficiently presented on compatible Garmin chartplotter/multifunction displays (MFDs). Digital processing allows for more precise recognition, enhancement, and filtering of radar echoes — making the finished display easier to read and interpret.
This pedestal's two speed gear box allows for an antenna sweep of either 24 or 48 RPMs, with an input voltage of 10.5 - 38 volts DC and a typical input power of 45W. The pedestal also powers radar covering a range up to 72 nautical miles.
What's in the Box:
- Pedestal must be used in combination with the GMR 404/406 (which must be purchased separately). Package includes:
- GMR 404/406 Radar Pedestal
- Carrying strap
- Field material kit
- Marine network data card
- Cable
- Field install cable end kit
- Voltage converter unit
- Owner's manual
- Installation instruction
- 010-00484-02
|
Physical & Performance GMR 406: |
| Unit dimensions, WxHxD: |
array: 6' (1.83 meters); pedestal: 24" x 11" x 16" (61 x 28 x 40.6 cm) |
| Weight: |
array: 16 lb (7.3 kg); pedestal: 42 lb (19 kg) |
| Waterproof: |
yes (IPX6) |
| Antenna sweep: |
24 and 48 rpm |
| Transmit power: |
4 kW |
| Power input: |
10.5 - 38 V DC, 45 W |
| Beam width: |
1.1° horizontal, 25° vertical |
| Maximum range: |
72 nm |
| Minimum range: |
20 meters |
Features: |
| Garmin Marine Network™ compatible: |
yes |
| High definition (outstanding target separation with less screen clutter): |
no |
| MARPA target tracking (collision avoidance): |
yes (requires heading sensor; sold separately) |
| Guard zone alarm: |
yes |
Physical & Performance Pedestal: |
| Unit dimensions, WxHxD: |
24" x 11" x 16" (61 x 28 x 40.6 cm) |
| Weight: |
42 lb (19 kg) |
| Waterproof: |
yes (IPX6) |
| Antenna sweep: |
24/48 RMP |
| Transmit power: |
4 kW |
| Power input: |
10.5 - 38 V DC, 45 W |
| Maximum range: |
72 nm |
| Minimum range: |
20 meters |
Marine Heading Sensor
When interfacing this three-axis compass heading sensor to Garmin’s marine lineup of MFDs and radars, mariners can expect unparalleled radar overlay performance and accuracy along with excellent MARPA capabilities.
This heading sensor (based on Airmar H2183) uses a rate gyro, so it can maintain an exceptional 2 degree heading accuracy under heavy dynamic conditions, with up to 30 degrees of pitch and roll. In addition, it supports either NMEA 0183 or NMEA 2000® data output to fit any installation.
Installation is a snap thanks to the heading sensor’s innovative design allowing it to mount to any angled bulkhead. Mariners can expect this heading sensor to provide trouble-free service in the harshest conditions and will learn to appreciate its reliability and excellent performance.
- Better than 1 degree static heading accuracy
- Industry leading 2 degree dynamic accuracy up to 30 degree pitch and roll
- Three-axis solid-state compass provides accurate heading data
- Three-axis accelerometer improves heading, pitch and roll in static conditions
- Three-axis rate gyro improves heading, pitch and roll in dynamic conditions
- Temperature compensated across the entire operating range to ensure optimum accuracy
- Heading output by default is 10 Hz for both NMEA 0183 and NMEA 2000 (NMEA 2000 can be output up to 20 Hz)
- Easy installation to any angled bulkhead
- Auto-calibration feature
- Waterproof housing (IPX6)
- Dimensions: 2" (5.08 cm) H x 4.4" (11.18 cm) L x 4.5" (11.43 cm) D
- Operating voltage: 9 VDC to 16 VDC
|
|
