Handheld GPS Systems, Receivers, Vehicle Tracking Devices

Home      Garmin GPS      Magellan GPS      GPS  Navigation for your CAR      GPS Vehicle Tracking      Marine GPS      Software 

ACCESSORIES FOR GARMIN GPSMAP 188/188C Sounders

 

A/C,PC adapter, 18pin (US)

 

This adapter allows you to connect your GPS unit to AC power (U.S., 110-volt) and to your PC. Features standard 9-pin D connector.

MapSource BlueChart

Garmin MapSource BlueChart

 

8 ft. extension cable for GA 26 series antenna

 

If the 8 feet of cable that comes with the GA 26C remote antenna isn't enough, here's another 8 feet.

 

MapSource MetroGuide EUROPE

MapSource WorldMap

 

 

2nd Mounting station

Used with GPSMAP 188C

 

With this second mounting station, you can have your GPS unit at your side whether you're navigating from the cabin or the fly bridge. Kit includes gimbal mounting bracket and power/data cable.

MapSource Topo

 

Cigarette lighter adapter

 

Just another option for powering your fishfinder or GPS unit. Plugs into any standard cigarette lighter receptacle. Also works with the PC interface cable

 

USB Data Card Programmer

No more twiddling your thumbs and burning your GPS batteries while you download map detail to the data card. The USB data card programmer downloads maps directly to the data card in a fraction of the time. Connects to the USB port on your PC.

 

Transducers
(click here)

Transducers, Transducers, Transducers

Transducer everything!

(click here)

128MB Data Card 

 

Sun Shade Visor

256MB Data Card

Max out the memory in your GPS unit with this data card. Holds up to 256 megabytes of data from MapSource CD-ROMs so you can download a ton of street-level map detail, points of interest, business addresses and phone numbers, topographic information and more.

Garmin GA 30 marine GPS antenna

GA 30 remote Marine Antenna

Includes pole/surface/under-deck mount capability with mounting brackets, 30 ft. cable and BNC connector

INLAND LAKES CONTINENTAL U.S.

Replacement GA 26C low-profile remote automobile antenna

This new and improved remote antenna runs on a lower voltage so battery drain is minimized. Comes with two mounting options. Magnetic mount for the outside of your vehicle or boat. Suction mount holds antenna in place against the inside of your windshield or window. With 8 feet of cable and BNC connector.

 

GA 26/27 series Flange Antenna Mount

If you're mounting a GA 26/27 and GA 26C/27C antenna to a thin surface, such as the outside of an RV, boat, or car, add some structural strength with this sturdy, one-piece flange mount.

GA 28/GPS35/GPS36 series Flange Antenna Mount

If you're mounting a GA 28 antenna to a thin surface, such as the outside of an RV, boat, or car, add some structural strength with this sturdy, one-piece flange mount.

 

 

 

GA 26/27 series Antenna Suction Cup Mount (replacement)

 

Retrofit adapter cable

010-10210-00

010-10210-00

No need to yank out the existing wiring to your transducer and power supply if you're upgrading to a newer Fishfinder or GPS model with a single port. This cable plugs into the back of the new unit and then splits to connect to the transducer and power supply.

© Copyright 1998-2010, GPS-on, Inc. 
All rights reserved.