NOTICE TO DRIVERS IN CALIFORNIA AND MINNESOTA: State law prohibits drivers in California and Minnesota from using suction mounts on their windshields while operating motor vehicles. Other Garmin dashboard or friction mounting options should be used. Garmin and GPSonSALE does not take any responsibility for any fines, penalties, or damages that may be incurred as a result of disregarding this notice. (See California Vehicle Code Section 26708(a); Minnesota Statutes 2005, Section 169.71)

(cables not included)

RAM-B-138-GA19U

SCREW IN BASE

(cables not included)

RAM-B-149Z-GA19U

U-BOLT BASE

RAM-B-166-GA19U

TWIST-LOCK SUCTION CUP BASE

NUVI SCREW IN BASE

RAM-B-138-GA21

U-BOLT BASE FOR BIKES

RAM-B-149Z-GA21

NUVI SUCTION CUP BASE

RAM-B-166-GA21

NUVI FLEX ARM MOUNT

RAP-105-6224-GA21U

RACHET-PIVOT SUCTION

RAP-B-104-224-GA21U

FOR GARMIN Nuvi 200-250-270-750-760-770 and StreetPilot c530-c550-c580 and "i"series

(Requires use of some cables and mounting components included with GPS from Garmin)

Flat Surface Screw-In Mount

RAM-B-138-GA22U

Locking Suction Base

RAM-B-166-GA22U

RATCHET, PIVOT, SUCTION MOUNT

RAP-B-104-224-GA22U

FLEX ARM, TWIST LOCK, SUCTION CUP

RAP-105-6224-GA22U

RAM-B-138-GA8

SCREW IN BASE

RAM-B-149Z-GA8

U-BOLT BASE FOR BIKES

RAM-B-148-GA8

SUCTION CUP BASE

TWIST-LOCK SUCTION CUP WITH 6" FLEX

RAP-312-GA8

RAM-B-138-GA20U

SCREW IN BASE FOR RINO 500

Cig adapter DOES NOT work with RAM mount; it will only run off it's internal battery

RAM-B-149Z-GA20U

U-BOLT BASE FOR BIKES RINO 500

Cig adapter DOES NOT work with RAM mount; it will only run off it's internal battery

SUCTION CUP BASE RINO 500

Cig adapter DOES NOT work with RAM mount; it will only run off it's internal battery

RAM-B-166-GA20U

TWIST-LOCK SUCTION CUP WITH 6" FLEX RINO 500

Cig adapter DOES NOT work with RAM mount; it will only run off it's internal battery

RAP-105-6224-GA20U

RAM-B-138-GA14U

SCREW IN BASE

RAM-B-149Z-GA14U

U-BOLT BASE FOR BIKES

RAM-B-148-GA14U

SUCTION CUP BASE

TWIST-LOCK SUCTION CUP WITH 6" FLEX

RAP-312-GA14U

SCREW IN BASE

RAM-B-138-GA7U

U-BOLT BASE FOR BIKES

RAM-B-149Z-GA7U

SUCTION CUP BASE

RAM-B-148-GA7U

TWIST-LOCK SUCTION CUP WITH 6" FLEX

RAP-312-GA7U

Screw On Base

RAM-B-101-G3U (you will need to use part of mounting bracket and electrical cables supplied by Garmin that were included with your original GPS purchase)

"U" Bolt Base (1/2" to 1") for Motorcycle

RAM-B-149Z-G3U (you will need to use part of mounting bracket and electrical cables supplied by Garmin that were included with your original GPS purchase)

Locking Suction Windshield Base

RAM-B-166-G3U (you will need to use part of mounting bracket and electrical cables supplied by Garmin that were included with your original GPS purchase)

SCREW IN BASE

RAM-B-138-GA10U

U-BOLT BASE

RAM-B-149Z-GA10U

SUCTION CUP BASE

RAM-B-148-GA10U

TWIST-LOCK SUCTION CUP WITH 6" FLEX

SCREW IN BASE

RAM-B-138-GA5U

U-BOLT BASE

RAM-B-149Z-GA5U

SUCTION CUP BASE

RAM-B-148-GA5U

TWIST-LOCK SUCTION CUP WITH 6" FLEX

RAP-312-GA5U

SCREW IN BASE

(includes cradle)

RAM-B-138-GA16U

U-BOLT BASE

(includes cradle)

RAM-B-149Z-GA16U

SUCTION CUP BASE

(includes cradle)

RAM-B-148-GA16U

RAM SUCTION CUP, TWIST LOCK MOUNT (includes cradle)

RAM-B-166-GA16U

RAM RATCHET, PIVOT, SUCTION MOUNT (includes cradle)

RAP-B-104-224-GA16U

RAM FLEX ARM, SUCTION CUP, TWIST LOCK MOUNT (includes cradle)

RAP-105-6224-GA16U

SCREW IN BASE

RAM-B-138-GA12U

U-BOLT BASE

RAM-B-149Z-GA12U

SUCTION CUP BASE

RAM-B-148-GA12U

TWIST-LOCK SUCTION CUP WITH 6" FLEX

RAP-312-GA12U

SCREW IN BASE

U-BOLT BASE

SUCTION CUP BASE

TWIST-LOCK SUCTION CUP WITH 6" FLEX

6" Flex Arm w Double Round Connectors

RAP-105-6RRU

6" Flex Arm w Diamond and Round Connectors

RAP-105-6DRU

6" Flex Arm w Diamond Connectors

RAP-105-6DD

Strap Clamp Base with Ball

Fits Diameters from 1/2" to 2"

RAM-B-108B

DRINK CUP HOLDER MOUNT

RAM-B-132

DIAMOND BASE

RAM-B-238

RAP-319

U-Bolt shim for 1/2" to 3/4" handlebars

ROUND BASE

RAM-B-202

YOKE BASE

RAM-B-121B

SUCTION CUP BASE

RAM-B-224

DOUBLE SOCKET ARM FOR 1" BALL (2 1/4" long) 

RAM-B-201U-A

Locking 3.3" Dia. Suction Cup. Screws to Diamond Base or Round Base.

RAP-224-1U

RAM-B-231

RAM BASE W/ U-BOLT FOR 3/4" TO 1" DIA.

ADHESIVE BASE

RAP-273

HANDLEBAR & RAIL MOUNT

RAM-B-149Z

SUCTION CUP MOUNT

RAM-B-148U

RAM HOLDER GARMIN NUVI 350 & 360 ONLY(requires use of cables & suction bracket included with original package from Garmin)

RAM-HOL-GA21U

DOUBLE SOCKET ARM FOR 1" BALL (3 3/4" long) 

RAM-B-201

(click image to see how it attaches)

Nuvi 200-250-270-750-760-770 and StreetPilot c530-c550-c580 and "i"series cradle

RAM-HOL-GA22U

Garmin eTrex Cradle

(USE DIAMOND BASE TO ATTACH)

RAM-HOL-GA5U

RAM PIVOT SUCTION MOUNT TWIST LOCK

RAP-B-104-224

RAM-HOL-GA8U

Garmin Rino 110, 120, 130 Cradle

(USE DIAMOND BASE TO ATTACH)

RAM-HOL-GA20U

Garmin Rino 500 series cradle

Garmin 176/276 Cradle

(USE DIAMOND BASE TO ATTACH)

RAM-HOL-GA7U

RAM-HOL-GA19U

Garmin c300 series cradle (comes with 1" ball)

(USE DIAMOND BASE TO ATTACH)

COLOR 76 SERIES ONLY

Garmin GPS 76c/cs Cradle

RAM-HOL-GA14U

Garmin iQue 3600 Cradle

(USE DIAMOND BASE TO ATTACH)

RAM-HOL-GA10U

Garmin 60c/cs Cradle

(USE DIAMOND BASE TO ATTACH)

RAM-HOL-GA12

Garmin 7000 series cradle

The RAM cradle converter is designed to connect to the Garmin Cradles from the following Garmin mounts:
Garmin Cradle from the Auto Mounts
Garmin Cradle from the Swivel Mounts
Garmin Cradle from the Suction Mounts
Garmin Cradle from the Non Skid Mounts
Compatible Garmin Mounts are the Garmin eTrex Series, eTrex Color Series, eMap, GPSMAP 60C, GPSMAP 60CS, GPS 72, GPS 76, GPSMAP76, GPSMAP76S, GPSMAP76C, GPSMAP76CS, Geko Series, Rino Series, iQue 1620, iQue 3200, iQue 3600, iQue 3600a, and iQue M5.

RAM-HOL-GA11U